Instructions

Job Description

Gearbox Studios is a design and production studio that specializes in the development of interactive content across multiple platforms.

We need voice over for training modules that will explain how to use a company's software and hardware. There will be many (10 - 40) modules so this would be an on-going project.

Script example:
[Screen displaying title of module “Connecting your computer to the Nexia hardware”]

VO: Hello and welcome to this learning module of Nexia. We hope that this module will help you with your understanding of how Nexia software and hardware works.

[Screen with NEXT button and image of the Nexia hardware and software]

VO: Before we start this learning module we are assuming that you have the Nexia software installed on your computer. If you do not have the Nexia software installed on your computer, please do so now.

[Image of desktop of computer going through the actions]

Before we connect the Nexia unit, we need to make sure we have a unique IP address assigned to your computer. To do this, right click on “My Network Places”, select “Properties”, then right click on “Local Area Connection”, select properties again. This brings up the “Local Area Connection Properties” window.

Select “Internet Protocol [TCP/IP]” and then select “Properties” one last time. The “Internet Protocol (TCP/IP) Properties” window will now be open. Select “Use the following IP address”. We are going to assign your computer a distinct IP address so that it will not conflict with Nexia unit’s IP address. If they have the same address they will not be able to communicate to each other.

The Nexia unit comes with set address of 192.168.1.101 so you will not want to use this address. Instead, use 192.168.1.x where x equals a number between 1 to 254, except 101 which is the number that is assigned to the Nexia unit. I’m going to use “1” since it will be easy for me to remember. Next we enter.........