IKEA Assembly Voice Over - Pitch
Description
Vocal Characteristics
Language
EnglishVoice Age
Young Adult (18-35)Accents
British (General)Transcript
Note: Transcripts are generated using speech recognition software and may contain errors.
Welcome to your like a Goliath video manual. Before you start assembling any eye care product, be sure you have enough space around you. We advise you not to open any eye care box with a sharp object, as you could damage the product contained within a useful tip. Use the product packaging as a surface to build on so you don't damage your Goliath or flooring. The archaea Goliath comes with a plastic bag full of different screws, connectors and would plugs. You also have some guide rails for the drawers. Another useful tip. Create piles of the same screws and would plugs to save you time finding what you need later on. In addition to the contents of the Goliath box, you will also need a hammer across headed screwdriver on a slotted screwdriver. Now, carefully take out all of the parts from the cardboard box. Take the two big board, which have 14 holes on the one side, and place them on the packaging with the holes facing upwards. These are the size of the Goliath. Now fix the guide rows to the board, using the wood plugs in your hammer to tap them home. You will need to repeat this exercise six times to connect all of the rails. Once the guardrails are fixed, the next step is the hammer in a would plug into each hole along the edges of the boards. Now carefully take the two other boards, which are the top and bottom of Goliath and have four holes, neither side, and place them on the packaging with the holes facing upwards. Take your cross headed screwdriver and gently screw in the large screws into the board. In the next step, you need to take the remaining board, which is the back of Goliath, and tap into wood plugs on either side. Now take the two outer sides to which you have already fixed the guide rails and connect these to the back of Goliath. Take the top and bottom you have already prepared and connect these to the unit with your slotted screwdriver school in four connectors into the unit clockwise until you feel enough resistance, start gently on. Don't apply too much force when doing this. Now you need to take eight of the smaller screws and connect each wheel to the Goliath with two screws. One draw consists of a front, a back as well as two sideboards, notes that the front is the same colour as the cupboard. Take the front of the draw and places on the packaging with the six holes facing upwards. Screw in two of the large screws with your slotted screwdriver into the indicated holes you now need to tap in. One would plug per side of the draw is that you can connect the side of the draw to the front of Goliath. Careful, make sure you connect the side of the correct way round. It has shown here. The grooves on the sites need to be facing outwards as they're needed for the guide rails to slide into later. Once done, take to screw connectors and insert one per side of the draw again, starting gently until you feel enough resistance to start giving the Goliath draw the necessary stability. You now need to slide in the thin bottom of the drawer into the grooves. Now take the back of the drawer, hold it in position on hammer in the nylon nails gently. You will need to on either side. Your first drawer is now almost complete. All that is needed is to connect the draw handle for this. Take two of the screws indicated on DH. Simply screw these in using your slotted screwdriver. Insert the draw, making sure the draw grooves on either side. Slide over the guide rails. Your final step is to take the two nylon screws indicated on DH. Screw these in either side. Using your slotted screwdriver building. Insert all of your drawers like this on. Then you have completed assembling Goliath.