Jim Hummel Technical Demo

Profile photo for Jim Hummel
Talent Online
0:00
Elearning
137
1

Description

Technical read for internal and external distribution

Vocal Characteristics

Language

English

Accents

North American (General)

Transcript

Note: Transcripts are generated using speech recognition software and may contain errors.
Section 3.2 Spray nozzle. The spray nozzle shall be constructed of metal not subject to corrosion by water and shall be 17.5 millimeters 0.69 inches an inside diameter with a central hole drilled in line with the longitudinal axis. An intermediate row of eight holes drilled six millimeters 60.23 inches. Center to center at an angle of five degrees from the longitudinal axis and an outer row of eight holes. Drilled 11 millimeters 110.44 inches. Center to center at an angle of 10 degrees from the longitudinal axis. All whole shall be 0.5 millimeters 0.2 inches in diameter. The spray nozzle shall have been checked within six months prior to test in a cement sample to ensure that the flow rate is between 1,503,000 grams per minute. At 69 plus or minus three Killah Paschal's 10 plus or minus 100.4 P. S. I