FaucetPal Installation Guide
Description
Vocal Characteristics
Language
EnglishVoice Age
Middle Aged (35-54)Accents
North American (General)Transcript
Note: Transcripts are generated using speech recognition software and may contain errors.
this'll video is going to show you how easy it is to install the faucet. Pal. The faucet pal comes with dual threads to accommodate faucets with both male and female threads. Step one. Unscrew and remove your narrator an existing gasket. Here's the old gasket. Notice how the air Raider has threads on the outside. That means your faucet has female threats. If you do not see the old gasket, put your finger inside the faucet and make sure to locate and remove it. Sometimes the gasket gets stuck inside the faucet. Also, make sure the threads air clean and that there's no gunk in there. For this installation, you will need to remove the decorative ring. To do so. Pull up on the ring while turning it next. Make sure the gasket that comes with the faucet pal is on top of the screen gasket and carefully screw the faucet pal unit into the faucet hand tighten until secure in place. Now we're going to show you how to install the faucet pal on a faucet with male threads. Step one is the same. Unscrew and remove your narrator and existing gasket. In this scenario, you will not need the gasket that comes with the faucet, pal. Decorative ring stays in place. Make sure the threads air clean. Now, just carefully screw on the faucet, pal in hand. Tighten. Okay, The vase it pal has a continuous flow function. See this clip. To use this function, just slide the clip up the unit to release. Just tap on the handle. Do not pull. You may want to remove it if you have small Children or for someone with Alzheimer's, for example, where you do not want them to have the ability to leave the water running to remove, simply clip it off. Okay, The last step is to set your faucet valves to the flow and temperature you want. Then release the handle of the faucet pal. After that, you will not have to touch your faucet valves again unless you have to tend to plumbing repairs or maintenance. If you have a small sink that interferes with the handle, you can rotate the faucet pal to the side. Inspect your faucet and plumbing to make sure you do not have any links. If you are unsure, do not leave your faucet valves in the open position or consult. A plumber faucet pal is not responsible for underlying plumbing issues