Technical, Manufacturing, Straightforward, Explanatory, Informative

Profile photo for Ryan Whiting
Not Yet Rated
0:00
Video Narration
7
1

Description

Manufacturing, technical, explanatory sample

Vocal Characteristics

Language

English

Voice Age

Middle Aged (35-54)

Accents

North American (General) North American (US General American - GenAM)

Transcript

Note: Transcripts are generated using speech recognition software and may contain errors.
To begin, slide the side doors out and unlock the hinges on the back to pull the cover completely off. Next, push the bump stop down and slide it out to remove the roller repeat on the opposite side, loosen the holders on each side by turning the manual knobs and removing the wedge block using a 17 millimeter wrench unscrewed the nuts on the top of the drive motor cover. Next, open the back hood and loosen the knobs and remove the conveyor. Push the bump stops down and out, then turn the pressure drive over on the right side. Use a 13 millimeter wrench to loosen the serpentine belt tension idler sprocket, move upwards and tighten again. So it does not touch the belt.