Instruction video voiceover

Profile photo for Leonard Khirug
Not Yet Rated
0:00
Video Narration
8
0

Vocal Characteristics

Language

English

Voice Age

Middle Aged (35-54)

Accents

North American (General)

Transcript

Note: Transcripts are generated using speech recognition software and may contain errors.
the mobile home cage and the tracker are delivered in one box. The box contains three separate layers with components. The top layer contains small parts and accessories, including the carbon cage. The middle layer houses the air dispenser, and the bottom layer contains the tubing. First, take out the air dispenser and place it on the flat surface. Take out the towers, four tower connectors and to tower stoppers. Connect them to the air dispenser has shown. Do not fully tightened the connectors at this point. Insert the bridge into the towers and tighten the screws on the side off the towers to hold the bridge in place. Now tighten the screws off the tower connectors. Insert the clamp and tightened the two screws on the back of the bridge. Connect a long hose to the air dispenser. Using the quick release connection system. Take the short hose, which is called the Noise Reduction Unit and connected to the long hose. Finally, a touch despair. Quick release connector to the noise reduction unit and connect this part to your air source. Connect the electronic control unit or E. C. U. By plugging one end of the cable to its sense support and the other end to this lot off the air distributor connect the EEC you to your Windows based computer using the USB cable. The package comes with six magnetic mats with each matt sandwiched between two protective plates. Take out one matt and inserted into the cage so that the magnet marked red is closest to the door in the box. You will also find a USB flash drive containing the software and the user manual in PdF format, full of the instructions provided in the manual. The latest version of the software can be found on Get Hub and Bit Bucket. The mobile home cage with tracker is now ready for use. If you have any questions, please contact us by online chat, email or phone.