Talent Online

Jim Hummel

Battle Ground, Washington, US • 7:04 AM Local Time

5.0 • 146 Reviews
0:00
0:00
99

Jim Hummel

Category Educational
Language English (North American)
Description Technical read for internal and external distribution
Transcript Note: Transcripts are automatically transcribed and may contain errors.
Section 3.2 Spray nozzle. The spray nozzle shall be constructed of metal not subject to corrosion by water and shall be 17.5 millimeters 0.69 inches an inside diameter with a central hole drilled in line with the longitudinal axis. An intermediate row of eight holes drilled six millimeters 60.23 inches. Center to center at an angle of five degrees from the longitudinal axis and an outer row of eight holes. Drilled 11 millimeters 110.44 inches. Center to center at an angle of 10 degrees from the longitudinal axis. All whole shall be 0.5 millimeters 0.2 inches in diameter. The spray nozzle shall have been checked within six months prior to test in a cement sample to ensure that the flow rate is between 1,503,000 grams per minute. At 69 plus or minus three Killah Paschal's 10 plus or minus 100.4 P. S. I